The manufacture of a carp rod from A to Z

We are a French manufacture who have total control of each stage of the manufacturing process of a rod, allowing us to create unique blanks that fully meet the expectations of the most demanding angler. These are the 10 stages that go into the manufacture of a carp rod.


1st stage – The coldroom


The dozens of rolls of fibre we used to manufacture our blanks are kept in the freezer at -23 degrees in order to stabilise the small amount of resin content mixed with the fibres. Indeed, to transform a carbon web – imagine a roll of fabric and you will be close – into a solid blank, the carbon fibres are mixed with a thermosetting resin whose performance depends on temperature. At -23°C, this resin is solid and stable; at ambient temperature, it begins to react, and it can therefore only be kept for a few days. Finally, once the different carbons have been assembled, this resin will undergo a long, meticulously-controlled cooking process which will cause it to fuse with the carbon fibre to produce the blank as we know it. The carbon cloths are packaged in rolls of several dozen or even hundreds of linear metres in size. We work with the latest generations of carbon, principally used in the aerospace industry. The resins we used are all enhanced with Nano-particles, similar to reinforced concrete, which make it possible to strengthen the blank and achieve a considerable improvement in its life expectancy and resistance to micro-impacts – this is what is known as ‘Nano Carbon Matrix’ technology.


2nd stage – The robotic cutting machine


Once the rolls are out of the freezer, they are placed on the digitally-controlled robotic cutting machine and then painstakingly unrolled. This brand-new, highly-sophisticated machine allows precise cuts to be made, accurate to around 1/100 of a millimetre, and above all makes it possible to ensure the repeatability of the cutting process, so each blank that leaves the Banana Rods factory conforms rigorously to the initial specifications. A blade with an extremely sharp edge cuts the cloth at high speed, cleanly and with no burr.


3rd stage – Assembling the sheets of carbon


Now let’s move on to the phase where the rod takes shape. At this stage, the different carbons that make up the blank (up to 10 in the same blank) are assembled and placed on a mandrel. To give the rod its conical shape, tempered steel mandrels, heat-treated to obtain a perfectly smooth surface, are used in the manufacture of each component. Before each process of assembly, the mandrels are placed on a hot-plate to ensure that the carbon adheres perfectly. The mandrel is placed with great precision on a table, where a special machine moves into position and winds the sheets of carbon around the mandrel under high pressure so as to create a seamless unit, with as little air as possible. It is at this stage that the rod takes shape, with the sheets of carbon taking on a slim conical form, the colour of anthracite.


4 – Vacuum treatment


Once wound onto the mandrel, the fibre will be wrapped in a special plastic film to allow the blank to undergo a uniform cooking process. Indeed, before becoming solid, the resin (which is used at extremely low levels in our blanks) will pass through a liquid state. Placing the blank in a vacuum allows the resin to spread evenly in all directions. This process ensures that each mm3 of carbon will contain precisely the same amount of resin as its neighbour. The blank is very slim, and it is therefore crucial that the resin is distributed perfectly.


5 – The oven – cooking for 7 - 8 hours


We’re not talking about a domestic oven here, but a huge autoclave oven several metres high, which can hold up to 200 blanks in a single cooking process. This mandatory stage generally lasts between 7 and 8 hours. Each cooking cycle is controlled by a computer linked to the network. This regulates the cooking cycle on the basis of a strict norm from the field of aeronautics, NADTAC.


6 – Extraction - a delicate stage


Once the cooking phase has finished, the blank and the mandrel form a single unit. An extremely powerful machine has been developed to separate the blank from the mandrel. Despite its jack developing 6 tonnes of traction, each extraction is carried out with delicacy so as not to damage the sensitive fibres. Once the mandrel is freed, the blank already looks more like a proper rod!



7 – Sanding


All the initial stages have made it possible to produce the blank that will become a rod; however, we need to remove the excess resin and give the blank an exclusive shine, impervious to impacts and ageing - the famous ‘Diamond’ finish. At first glance, you would think it was varnish, whereas it is actually the carbon, polished so finely that it shines!


8 – Test-bench


This is the moment of truth – from each series of blanks, we sacrifice one in order to ensure that the strength of the batch conforms to the strict specifications set down for each model.


9 – Finish – Dexterity, meticulousness and precision


A blend of know-how, high technology, and most importantly nimble fingers, ensures a perfect finish at every stage. To begin with, the reel-seat is fitted to the blank using an exclusive process that bonds the two components together while at the same time preventing any risk of the reel coming loose or rotating. Next comes the alignment of the FUJI rings, which are positioned by laser using a machine developed only by us to ensure that they are placed with total precision. As for the whippings, several processes are available, including the use of traditional thread, but above all there is the patented Banana Rods carbon whipping process, in which the whipping is fused with the blank during a second curing process, giving exceptional results as well as previously unachieved lightness. This leaves the tippings, applied with the same precision as the whippings. Superb!


10 – Varnishing – into the clean room


The finish is produced over several stages, separated by long drying intervals, and it’s the cumulative effect of a number of fine layers of varnish that gives a perfect result. This meticulous stage is carried out by hand in a clean room under high pressure, with the air filtered to 0.5 microns. The varnishes used are custom-made, ensuring a perfect surface finish with no peaks, imperfections, or bubbles. Other rod-manufacturing companies use much faster drying processes, which often results in lower quality, especially with long sections.


76 vues

CONTACT US

+33 238 14 26 54

287, rue Aristide Briand

45450 Fay-aux-Loges

France

OUR VISION

The Brand

PRESS REVIEW

About us

CUSTOMERS' REVIEW

Feedback